manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 99 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 99

99

 

8

Communications Function

WARNING

 

„

Turn off all devices before connecting or disconnecting interface 

connectors.

Failure to do so could cause the operator to experience an electric shock.

CAUTION

 

„

Do not unplug communications cables while the instrument is sending or 

receiving data.

Doing so could damage the instrument or computer.

 

„

Do not short or input any voltage to the connector or output unit.

Doing so could damage the instrument

 

„

Securely connect the connector.

Otherwise, the instrument may be damaged or may not meet the specifications.

 

„

Use the same ground for the instrument and computer.

When a communications cable is connected to the instrument with a potential 

difference between the ground circuits of the instrument and the PC, the instrument 

and PC may be damaged or malfunction.

 

„

Once the communications cable is connected, tighten the screws on the 

connector.

Otherwise, data may not be transferred properly.

8 

Communications Function

Communications Function

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments