Hioki BT5525 Instruction Manual Download Page 183

Page: 183 / 215

183

Input, Output, and Measurement Specifications

(4) Comparator function

Settings

Use the

key

[COMP]

on the main unit to make settings.

The function can be set using the resistance upper limit value and lower limit value.

The set value is optional.

Judgment

UPPER_FAIL

Measured value > Upper limit

PASS

Lower limit ≤ Measured value ≤ Upper limit

LOWER_FAIL

Measured value < Lower limit

UL_FAIL

Judgment is not possible, or BDD judgment is enabled and the

BDD count is 1 or greater

Beep

ON/OFF (based on the judgment beep setting)

Judgment output

Based on the test mode

When a UL_FAIL judgment is given, both the UPPER_FAIL and LOWER_FAIL signals

are output.

The final test result is retained.

See “3.6 Judging the Measured Value (Comparator Function)” (p. 44).

(5) Panel function

Settings

Use the

MENU

key on the main unit to make settings.

Save and delete

Enabled

Number of panels

Up to 15 panels (can be saved or loaded)

See “6.1 Saving Measurement Conditions (Panel Save Function)” (p. 78) and

“6.2 Loading Measurement Conditions (Panel Load Function)” (p. 79).

(6) Memory function

Settings

Number of measured

values that can be saved

in the memory

999 measured values

See “4.4 Memory Function” (p. 53).

(7) Sampling time

Setting range

1 PLC to 100 PLCs

See “3.3 Setting the Sampling Time” (p. 38).

(8) Measurement delay time

Setting range

1 PLC to 100 PLCs

See “3.4 Setting the Measurement Delay Time” (p. 39).

Specifications

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Search results

Summary of Contents for BT5525

Reviews:

Hioki BT5525, Instruction Manual, Page: 183 / 215

Search results

Summary of Contents for BT5525

Reviews: