manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 47 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 47

47

Notifying the Judgment Result and Test Completion with a Beep

3.8  Notifying the Judgment Result and Test 

Completion with a Beep

The following are the conditions for notifying the judgment result and test completion with a beep.
You can choose from three tones.

[OFF]

No beep

[PASS]

Issues a beep when the judgment result is PASS.

[FAIL]

Issues a beep when the judgment result is FAIL.

[END]

Issues a beep when the test is completed, regardless of the judgment result.

1

 

Open the Setting screen.

[SET]

 Select

2

 

Set the conditions for the beep.

Select

[OFF]
[PASS]
[FAIL]
[END]

3

 

Change the tone of the beep.

Press the 

F2

, 

F3

, or 

F4

 key to set the beep and check its volume.

Select

[TONE1]

 High

[TONE2]

 Medium

[TONE3] 

Low

[EXIT]

 Return to the Measurement screen

Basic Settings

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments