Hioki BT5525 Instruction Manual Download Page 185

Page: 185 / 215

185

Input, Output, and Measurement Specifications

(15) System reset function

Operations

All measurement conditions and panel data are initialized to the factory settings.

See “5.9 Initializing the Instrument (Reset)” (p. 75)

(16) Command monitor function

Operations

Communications commands and query responses are displayed on the screen.

Settings

Use the

MENU

key on the main unit to set ON/OFF.

See “8.6 Communications Command Display (Command Monitor Function)” (p. 112)

(17) Automatic data output function

Operations

Select from the following.
OFF:

Data is not output.

TYPE1: The measured value and judgment result are output.
TYPE2: The measured value (exponent display 000.0E + 06) is displayed.
Interface: The operations are based on the interface settings.

See “8.5 Automatically Sending the Measured Value Every Time a Test Is Completed (Auto Data Output

Function)” (p. 111)

Specifications

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Search results

Summary of Contents for BT5525

Reviews:

Hioki BT5525, Instruction Manual, Page: 185 / 215

Search results

Summary of Contents for BT5525

Reviews: