manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 101 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 101

101

RS-232C Interface

8.2  RS-232C Interface

The instrument can be controlled using the RS-232C interface. Set the same communications 
speed for the controller and the instrument.

Setting communications conditions

1

 

Open the Setting screen.

[SET]

 Select

2

 

Select the communications speed using 

[RS-232C SPEED]

.

Select

[9600]

 (bps)

[19200]

 (bps)

[38400]

 (bps)

[57600]

 (bps)

[EXIT]

 Return to the Measurement screen

Some of the communications speeds may not be used depending on the PC due to a greater error. 
If that is the case, select a lower speed setting.

Controller (PC, PLC, etc.) settings

Be sure to set the controller as follows.

 • Start/stop synchronization
 •

Communications speed: 9600 bps / 19200 bps / 38400 bps / 57600 bps (According to the 
instrument setting)

 •

Stop bit: 1

 •

Data length: 8

 •

Parity check: None

 •

Flow control: None

Communications Function

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments