Hioki BT5525 Instruction Manual Download Page 12 | Manualshive

Page: 12 / 215

Hioki BT5525 Instruction Manual Download Page 12

12

Safety Information

Safety Information

This instrument is designed to conform to IEC 61010 Safety Standards and has been thoroughly
tested for safety prior to shipment. However, using the instrument in a way not described in this
manual may negate the provided safety features.
Carefully read the following safety notes before using the instrument.

DANGER

Familiarize yourself with the instructions and precautions in this manual

before use.

Failure to do so could cause improper use of the instrument, resulting in serious

bodily injury or damage to the instrument.

WARNING

If you have not used any electrical measuring instruments before, you

should be supervised by a technician who has experience in electrical

measurement.

Failure to do so could cause the operator to experience an electric shock.

Moreover, it could cause serious events such as heat generation, fire, and an arc

flash due to a short-circuit.

HIOKI BT5525A961-00

«
...
10
11
12
13
14
...
»

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments