manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 97 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 97

97

Using Analog Output

7.6  Using Analog Output

When analog output is used, a DC voltage that is proportional to the resistance is output from the 

analog output terminal on the back of the instrument.

Analog output is updated at the same time as the instrument displays the measured value. When 
the test is ended, the analog output is held with the final voltage output.

A voltage is output according to the resistance range as shown in the following table.

4 V is output when the maximum value of each resistance range is displayed.

For the procedure to set and check the resistance range, see “3.2 Setting the Range (Auto/
Manual)” (p. 36).

Resistance Range

Resistance value range

Output voltage (DC)

2 M

Ω

0.000 M

Ω

 to 9.999 M

Ω

0 V to 4 V

20 M

Ω

0.00 M

Ω

 to 99.99 M

Ω

0 V to 4 V

200 M

Ω

0.0 M

Ω

 to 999.9 M

Ω

0 V to 4 V

2000 M

Ω

(100 V ≤ V ≤ 500 V)

0 M

Ω

 to 9999 M

Ω

0 V to 4 V

Total resistance range

Over.F

4 V

Under.F

0 V

IMPORTANT

When the resistance falls below the resistance display range, 

[Under. F]

 is displayed on the 

screen and 0 V is output from the analog output terminal.
See “Resistance measurement” (p. 180).

External Control (EXT

. I/O)

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments