Hioki BT5525 Instruction Manual Download Page 109

Page: 109 / 215

109

LAN Interface

Connecting a LAN cable

Connect a LAN cable to the LAN connector on the back of the instrument.

CAUTION

If routing a LAN cable outdoors or over more than 30 m, attach a LAN surge

protector or other suitable protective device.

Failure to do so could cause damage to the instrument due to increased susceptibility

to the effects of induced lightning.

Recommended cable: 100BASE-TX or 10BASE-T compatible LAN cable (Both straight and cross

cables can be used.)

Green LED

Lit: Linking

Blinking: Communicating

Orange LED

Off: 10BASE-T

Lit: 100BASE-TX

If the green indicator does not light up even when the LAN is connected, the instrument or
connected instruments may be damaged or the LAN cable may be broken.

Communications Function

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Search results

Summary of Contents for BT5525

Reviews:

Hioki BT5525, Instruction Manual, Page: 109 / 215

Search results

Summary of Contents for BT5525

Reviews: