Hioki BT5525, Instruction Manual, Page: 208 / 215

208
LOW Terminal Side Test Lead Fabrication
11.6 LOW Terminal Side Test Lead Fabrication
When processing the tip of the Hioki LOW terminal side test lead, follow the order below.
When stripping the coating and braided conductors, do not cut or short the test lead.
IMPORTANT
The accuracy of a measured value acquired using a LOW terminal side test lead processed by a
customer cannot be guaranteed.
Hioki LOW terminal side test lead shielded cable construction
Vinyl sheath
Polyethylene insulator
Conductive vinyl 1
Conductor
Conductive vinyl 2 Vinyl Insulator
Braided conductor for
the guard wire
Braided conductor for
the shielding wire
Item Thickness (Approx.) Diameter (Approx.)
Conductor – 0.54 mm
Conductive vinyl 1 0.23 mm 1.00 mm
Polyethylene insulator 0.85 mm 2.70 mm
Conductive vinyl 2 0.22 mm 3.15 mm
Braided conductor for the
guard wire
0.25 mm 3.65 mm
Vinyl Insulator 0.35 mm 4.35 mm
Braided conductor for the
shielding wire
0.25 mm 4.85 mm
Vinyl sheath 1.05 mm 7.00 mm
+0.0 mm
-0.2 mm
HIOKI BT5525A961-00