manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 74 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 74

74

Manually Setting the Frequency of the Power Supply

5.8  Manually Setting the Frequency of the Power 

Supply

There are three frequency settings for the power supply, AUTO, 50 Hz, and 60 Hz.
The power supply frequency needs to be properly set to eliminate noise.

The default setting is 

[AUTO]

 (the power supply frequency is automatically recognized when the 

power is turned on), however, the frequency can be manually set as well.
If the power supply frequency is not correctly set, the measured value is not stabilized.
If power supply noise is significant and the power supply frequency cannot be detected properly 
even when the frequency is set to 

[AUTO]

, 

[INFO:090 Power line cycle is not detected.,Select 

power line cycle.]

 is displayed when the power is turned on. Set the frequency according to the 

power supply.

1

 

Open the Setting screen.

[SET]

 Select

2

 

Set 

[POWER FREQUENCY]

.

(When 

[AUTO]

 is selected, the power supply frequency that is automatically recognized is 

displayed at the right side.)

Select

[AUTO]
[50Hz]
[60Hz]

[EXIT]

 Return to the Measurement screen

IMPORTANT

Automatic recognition of the power supply frequency is performed only once when the power is 

turned on.

When the frequency is changed from 

[50Hz]

 or 

[60Hz]

 to 

[AUTO]

, turn off the power and then 

turn on the power again.

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments