manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 36 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 36

36

Setting the Range (Auto/Manual)

3.2  Setting the Range (Auto/Manual)

There are two range settings, auto range and manual range. For the manual range, you can select 
from four settings, 2 M

Ω

, 20 M

Ω

, 200 M

Ω

, and 2000 M

Ω

. The range that can be set, however, 

varies depending on the test voltage.

See “9.2 Input, Output, and Measurement Specifications” (p. 180).

In the auto range, range movement takes place after the test starts. It may take time for the 
measured value to be displayed. In order to eliminate the wait time, set the range to manual 
according to the DUT.

Setting the test voltage in the Measurement screen

1

 

Set the range to the edit mode.

[RANGE]

 Select

2

 

Change and confirm the range.

Select the range

[AUTO]

 Set the auto range

[HOLD]

 Set the manual range

[ ↓ ]

 Lower the range

[ ↑ ]

 Raise the range

Confirm

[CANCEL]

 Cancel

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments