Hioki BT5525, Instruction Manual, Page: 142 / 215

142
Communications Command Reference
Setting the measurement delay time
Syntax
Command
:MEASure:DELay <Measurement delay time>
• Measurement delay time {1 to 100}
Sets the measurement delay time.
Description
Specifies the measurement delay time.
The measurement delay time is set in the range between 1 PLC and 100 PLCs.
1 PLC is equivalent to one cycle of a power supply frequency. At 50 Hz, 1 PLC = 1/50 =
20 ms. At 60 Hz, 1 PLC = 1/60 = 16.7 ms.
Example
:MEASure:DELay 5
The measurement delay time is set to 5 PLCs.
Querying the measurement delay time
Syntax Query
:MEASure:DELay?
Response
(3 bytes +
CRLF)
<Measurement delay time>
• Measurement delay time {1 to 100}
Returns the measurement delay time.
Description Queries the measurement delay time.
Example
:MEASure:DELay?
␣␣
5
The measurement delay time setting is 5 PLCs.
Setting the current limit value
Syntax Command
:CHARGe LIMit <Current limit value>
• Current limit value {0.05E-03 to 50.00E-03}
Sets the current limit value.
Description Specifies the current limit value.
When this command is executed, the auto current limit setting is OFF (MANUAL).
Example
:CHARge:LIMit 5E-3
The current limit value is set to 5 mA.
Querying the current limit value
Syntax Query
:CHARge:LIMit?
Response
(9 bytes +
CRLF)
<Current limit value>
• Current limit value {0.05E-03 to 50.00E-03}
Returns the current limit value.
Description
Queries the current limit value.
Example
:CHARge:LIMit?
␣
5.00E-03
The current limit value setting is 5 mA.
HIOKI BT5525A961-00