manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 100 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 100

100

Interface Overview and Features

8.1  Interface Overview and Features

The instrument can be controlled using the RS-232C interface, LAN interface, or USB interface.
It is not necessary to set which interface to use. However, use a single interface to control the 
instrument to avoid malfunction.
For the specifications, see “Interface specifications” (p. 186).
After the power is turned on, the Measurement screen is displayed. Wait for approximately 

3 seconds to send a communications command.

For communications command and query notations, see “8.9 Communications Command 
Reference” (p. 130).

Remote state and local state

The instrument is in the remote state during communications and 

[RMT]

 is displayed on the 

Measurement screen. Any operation keys except for the 

MENU

 key and 

STOP

 key become 

disabled.

[LOCAL]

Cancels the remote state and returns to the local state.

Stops measurement.

Pressing the 

MENU

 key cancels the remote state and enables the key operations.

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments