Hioki BT5525 Instruction Manual Download Page 211

Page: 211 / 215

211

Rackmount Fittings

11.7 Rackmount Fittings

Rackmount fittings or the like can be attached to this instrument after removing the screws from the

bottom.

WARNING

Use specified screws to attach the fittings to the instrument main body.

(M4

8 mm binding head machine screw) *

* Use any M4 screw with a shaft length of at least 8 mm but no greater than 9.5 mm.

When the rackmount fittings are reattached after removal from the

instrument, reuse the screws that were initially used.

If fittings are attached with other screws, the instrument may be damaged, causing a

risk of bodily injury.

If you lose or damage the screws, contact your authorized Hioki distributor or reseller.

Rackmount fitting reference drawing

Rackmount fitting (EIA)

2×C2

32.5

SPCC t2.3

2.3

44.5

2×C2

R3.5

88.1

4×C2

4.5

2×

480

215.5

464

Rackmount fitting (JIS)

215.5

480

460

2.3

2×C2

79 99

4×C2

4.5

32.5

2×

2×C2

SPCC t2.3

Appendix

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Search results

Summary of Contents for BT5525

Reviews:

Hioki BT5525, Instruction Manual, Page: 211 / 215

Search results

Summary of Contents for BT5525

Reviews: