manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 194 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 194

194

Repairs, Inspections, and Cleaning

Replaceable parts and service lives

Some parts used in the instrument are characterized by performance that degrades over years of 
use.
It is recommended to replace these parts regularly to ensure instrument functionality over the long 
term.
To order replacements, please contact your Hioki distributor.
Part service life varies with the operating environment and frequency of use.

These parts are not guaranteed to operate throughout the period defined by the recommended 

replacement interval.

Part name

Recommended

replacement cycle

Remarks and conditions

Electrolytic capacitor

About 10 years

Requires replacement of the printed circuit boards on which 

such parts are mounted.

LCD backlight

About 10 years

If the LCD backlight is used 24 hours a day for 365 days.

Fan motor

About 8 years

If the fan motor is used 24 hours a day for 365 days.

Cleaning

CAUTION

 

„

Periodically clean the vents to avoid blockage.

When the vents get clogged, the internal cooling effect of the instrument is hampered, 

and this can lead to damage to the instrument.

 

„

If the instrument becomes dirty, wipe the instrument clean with a soft cloth 

moistened with water or a neutral detergent.

Never use solvents such as benzene, alcohol, acetone, ether, ketone, thinners or 

gasoline. Doing so could deform and discolor the instrument.

Wipe the LCD gently with a soft, dry cloth.

Disposal

Dispose of the instrument in accordance with local regulations.

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments