Hioki BT5525, Instruction Manual, Page: 130 / 215

130
Communications Command Reference
8.9 Communications Command Reference
Command format example
11
Setting the power supply frequency
Syntax Command
:SYSTem:LFRequency <Power supply frequency>
• Power supply frequency {AUTO|50|60}
Sets the power supply frequency.
Description Specifies the power supply frequency.
AUTO The power supply frequency (50 Hz or 60 Hz) is automatically detected at
the time of startup.
50 The power supply frequency is set to 50 Hz.
60 The power supply frequency is set to 60 Hz.
Example
:SYSTem:LFRequency 60
The power supply frequency is set to 60 Hz.
2 2
33
44
55
11
< > Characters in these symbols indicate a parameter required for sending a command.
[ ] Characters in these brackets can be omitted.
{ }
Placing characters in these brackets indicates that one of the items in these brackets
needs to be selected. Items are separated with a vertical bar (|). Numerical values in these
brackets indicate a setting range.
22
Indicates command information.
33
Indicates the syntax of communications commands.
The command data or response message is described.
44
Describes the command.
55
Indicates an example of using the actual command.
The blank (0x20) in the query example is indicated as “ ␣ ”.
Command, query
Response
HIOKI BT5525A961-00