manualshive.com logo in svg

Hioki BT5525, Instruction Manual, Page: 108 / 215

Share
Download
Hioki BT5525 Instruction Manual Download Page 108

108

LAN Interface

Setting the LAN communications

When configuring the LAN communications settings using communications commands, use the 
following commands.
Comma delimiters are used to separate IP address and subnet mask values.

Command

Reference

:SYSTem:COMMunicate:LAN:IPADdress <Number 1>,<Number 

2>,<Number 3>,<Number 4>

Sets the IP address of the instrument.

p. 162

:SYSTem:COMMunicate:LAN:SMASk <Number 1>,<Number 2>,<Number 

3>,<Number 4>

Sets the subnet mask of LAN.

p. 163

:SYSTem:COMMunicate:LAN:GATeway <Number 1>,<Number 

2>,<Number 3>,<Number 4>

Sets the IP address of the default gateway.

p. 164

:SYSTem:COMMunicate:LAN:CONTrol <Port number>

Sets the port number of communications commands.

p. 165

:SYSTem:COMMunicate:LAN:UPDate

Updates the LAN settings.

p. 166

Enhancing the speed of LAN communications

The TCP/IP communications used for LAN communications of the instrument helps process the 
large volumes of data to be sent more efficiently. When small data, such as a command that 

controls the instrument, is sent, data transmission does not take place until the data to be sent 

reaches a certain volume, which makes the response from the instrument slower. In order to 
enhance the communications speed, disable the transmission delay (Nagle algorithm) in the control 

program.

For Visual Basic

®

, Visual C#

®

, Visual C++

®

/CLI (.NET Framework)

Set the NoDelay property of the TcpClient class to “true”.

For Visual C

®

/C++

®

 Microsoft Foundation Class, Visual Basic

®

 for Applications

Set TCP_NODELAY of the socket option to 1.

When using other programming languages, refer to the applicable document.

HIOKI BT5525A961-00

Summary of Contents for BT5525
























































































































































































































Reviews:

No comments