Hioki 3155-01, Instruction Manual

Page: 95 / 366

75
────────────────────────────────────────────────────
5.7 Patient Leakage Current Measurement Mode
────────────────────────────────────────────────────
5.7.5 Patient Leakage Current Measurement Screen
１３ １４
２
４
５ ６
７
３ ８
９
１０
１１
１２
１
6
１
7
１
8
１
１
5
Parameter Explanation
1
Maximum value The maximum measured value obtained in the current measuring mode
Changing the measuring mode will clear this value.
(When this value is 1
μ A or lower, "UNDER 1 μ A" is displayed.)
2
Maximum value judgment Result of comparison of the maximum value with the allowable value
PASS
: Allowable value or lower
F A I L
: Higher than the allowable value
3
Power source polarity for the
maximum value
Connection with the power source
Normal: , Reverse:
4
Condition of the equipment to
be measured for the
maximum value
Condition of the equipment to be measured
Single fault condition (110% voltage applied):
5
Current value Value obtained from the current measurement
(When this value is 1
μ
A or lower, "UNDER 1
μ
A" is displayed.)
6
Current value judgment Result of comparison of the current value with the allowable value
PASS
: Allowable value or lower
F A I L
: Higher than the allowable value
7
Power source polarity for the
current value
Connection with the power source
Normal: , Reverse:
Measurement of patient leakage current is made on the patient leakage
current measurement screen.
The current measured value, maximum value, and setting condition are shown
on the patient leakage current
measurement screen.
Further, windows for changing the measurement settings can be opened from
this screen.
(1) Set-up status display