Hioki 3155-01, Instruction Manual

Page: 108 / 366

88
────────────────────────────────────────────────────
5.9 Low Resistance Measurement Mode (ME Equipment)
────────────────────────────────────────────────────
5.9.3 Basic Settings for Low Resistance Measurement (ME
Equipment)
Low resistance measurement mode
screen
Initial screen
Measurement starts automatically.
When measuring with 3157 measuring
equipment settings, measurement is
executed on measurement window.
Allowable value set-up window
Print-out window
For a detailed set-up procedure, refer
to Section 5.10.5, "Printing out the
Maximum values."
For saving, refer to Section 5.10.6, "Saving
the Maximum Values."
After printing
Set the allowable value referring to
Section 5.10.2, "Allowable Value Setting."
(For enabling or disabling the allowable
value judgment, refer to Section 5.11.4,
"Allowable Value Judgment Set-up
Screen.")
Measurement window
When measuring with 3157 measuring
equipment settings, allowable value
set-up window cannot be selected.
Measuring defaults to 3157 allowable
value (at maximum test value).
This illustrates basic setting and reference categories until measurement.
Preparations for measurement follow Section 5.9.2, "Connecting Equipment for
Low Resistance Measurement."