Hioki 3155-01, Instruction Manual

Page: 251 / 366

231
────────────────────────────────────────────────────
8.4 Connecting Method
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
WARNING
In order to avoid electric shock, turn off the power to all devices before
plugging in or unplugging the RS-232C connector.
CAUTION
・ To avoid damage to the unit, do not short the connector and do not input
voltage to the connector.
・ Always fix the screws to connect the RS-232C cable.
１
２
ＢＢ（ＲｘＤ）
３ ＢＡ（ＴｘＤ）
４ ＣＤ（ＤＴＲ）
５ ＡＢ（ＧＮＤ）
６
７
ＣＡ（ＲＴＳ）
８ ＣＢ（ＣＴＳ）
９
３１５５ Controller
１
ＢＢ（ＲｘＤ） ２
ＢＡ（ＴｘＤ） ３
ＣＤ（ＤＴＲ） ４
ＡＢ（ＧＮＤ） ５
６
ＣＡ（ＲＴＳ） ７
ＣＢ（ＣＴＳ） ８
９
SHELL
8.4 Connecting Method
When connecting the controller (DTE), use a cross cable which meets the
connector specifications of both sides of the 3155 and the controller.
(1) Commands that contain data must be input in the specified data format.
(2) Refer to Chapters 5 to 7 for details about the various functions.
Example :
When connecting to the controller using a D-subminiature 9-pin connector
Specification
:
D-subminiature 9-pin female to D-subminiature 9-pin female connectors, with
"crossed" data connections