Hioki 3155-01, Instruction Manual

Page: 57 / 366

37
────────────────────────────────────────────────────
5.2 Screens (ME Equipment)
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
5.2.3 Measuring Mode Screen (ME Equipment)
(2) P
olarity and equipment
condition set-up window
(6) S
ave data window
(4) C
ontact condition set-up window
(3) M
easurement network
filter set-up window
(5) P
rint-out window
(7) Measurement current
set-up window
Automatic
(1) Allowable
value set-up window
Manual
NOTE
On the measuring mode screen, press the any one of the following keys to
open a window where the settings in question for that measuring mode can be
changed.
The following explanation uses the enclosure leakage current measurement
screen as an example:
: Clear the maximum value.
: Open the allowable value set-up window.
: Open the polarity and equipment condition set-up
window in the bottom half of the screen.
: Open the measurement network filter set-up window
in the bottom half of the screen.
: Open the contact condition set-up window in the
bottom half of the screen.
: Open the print-out window in the bottom half of the
screen.
: Open the save data window in the bottom half of the
screen.
: Return to the initial screen.
It is possible to set the measurement current when making patient leakage
current
and patient auxiliary current settings. Also, when making patient
auxiliary current settings, the AC+DC option is not available.