Hioki 3155-01, Instruction Manual

Page: 269 / 366

249
────────────────────────────────────────────────────
8.8.2 Commands
────────────────────────────────────────────────────
■ Sets the allowable value.
Syntax When the measuring mode has one allowable value:
:CONFigure:COMParator_<
data>
When the measuring mode has two allowable values:
:CONFigure:COMParator_<
data1>, < data2>
data
<data> Allowable value (Numerical value in NR3 format)
<data1> Allowable value in normal condition (Numerical value in NR3
format)
<data2> Allowable value in single fault condition (Numerical value in NR3
format)
Function Sets the allowable value.
The main unit displays allowable value as a product of the numerical value
and the coefficient, but when using RS-232C communications, the
coefficient is set as 100%. When setting the low resistance measurement,
the unit is
Ω and the range is 10.00E-03 to 500.0E+00. Otherwise the unit
is A and the range is 5.000E-06 to 20.00E-03.
The patient leakage current
and , and low resistance measurement
modes have one allowable value.
Sets one allowable value.
The earth leakage current, enclosure leakage current, patient leakage
current
, and patient auxiliary current measurement modes have two
allowable values.
Sets each allowable value in normal condition and single fault condition.
Note
Use this command only after using the ":SYSTem:COMParator" command
to enable allowable value judgment, and the ":MODE" command to set the
measuring mode.
Example
Transmission :CONFigure:COMParator 0.5E‑3
The allowable value is set to 500.0
μ
A.
Transmission :CONFigure:COMParator 0.1E‑3,0.5E‑3
The allowable value in normal condition is set to 100.0 μ A, and the
allowable value in single fault condition is set to 500.0
μ
A.
Error (ME equipment) (ordinary equipment)
If the allowable value judgment is disabled, or if the measuring mode has
not been set, or if the numerical value exceeding the range has been set, an
error occurs.
If the number of allowable values that can be set is not equal to the
number of data, an error occurs.
:CONFigure:COMParator