Hioki 3155-01, Instruction Manual

Page: 232 / 366

212
────────────────────────────────────────────────────
7.6 Condition Set-up Window Setting (Universal)
────────────────────────────────────────────────────
NOTE
Automatic measurement result screen
After the automatic measurements have been completed, the automatic
measurement result screen is displayed.
Measuring mode
Model name
Number
Measurement network filter setting
Measurement current
Maximum value
Power source polarity
Condition of the quipment to be
measured
Judgment
Contact condition
: Print all the automatic measurement results.
: Save all the automatic measurement results.
: Display the model name input screen.
: Display the number input screen.
: Return to the measuring mode screen.
If returning to the measurement screen without first either saving or printing
out the current data, that data will be lost.
(1) Printing the automatic measurement results
Press the key on the automatic measurement result screen to print all
the automatic measurement results.
Press the key to print. Press the key to disable printing.
During printing, the key is displayed on the screen. Press the key
to stop printing.
After printing, press the key.
(2) Saving the automatic measurement results
Press the key on the automatic measurement result screen to save all
the automatic measurement results.
Press the key to save. Press the key to disable saving.
If data with the same model name and number already exists, a request for
confirmation appears.
(3) Changing the model name and number
For details, refer to Section 7.2.2, "Equipment Set-up Screen (Universal)."