Hioki 3155-01, Instruction Manual

Page: 203 / 366

183
────────────────────────────────────────────────────
7.2 Screens (Universal)
────────────────────────────────────────────────────
7.2.5 Flow of Screens for Basic Operations (Universal)
Measuring mode screen
Polarity and equipment status
set-up window
Print-out window
Initial screen Equipment set-up screen
Select and press the keys for the power
source polarity and equipment to be
measured to set.
Measurement continues even while the
window is open.
For automatic measurement, refer to
Section 7.6.3, " Automatic Measurement
Setting."
Measurement starts automatically.
Set the grounding class of the
equipment to be measured, and
register the model name and
number.
After printing
For a detailed set-up procedure, refer to Section
7.6.5, "Printing out the Maximum Values."
For saving, refer to Section 7.6.6, "Saving the
Maximum Values ."
NOTE
・ Change of screens during basic operation is as follows.
・ On the measuring mode screen, measured values can be checked in real
time.
Setting conditions for each measuring mode is saved with each measuring
mode. However, the model name and number are held in common. Changing
the measuring mode will clear the maximum and current values.