Hioki 3155-01, Instruction Manual

Page: 331 / 366

311
────────────────────────────────────────────────────
10.4 System Reset
────────────────────────────────────────────────────
NOTE
Settings for patient leakage current
Measurement method Manual Condition of the equipment
to be measured Single fault condition
(110% voltage applied)
Power source polarity Normal
Measurement network filter ON (frequency
characteristics)
Class equipment Type B applied part Type BF applied part Type CF applied part
Normal
condition Single fault
condition Normal
condition Single fault
condition Normal
condition Single fault
condition
Earth leakage current 0.5 mA 1 mA 0.5 mA 1 mA 0.5 mA 1 mA
Enclosure leakage current 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.1 mA 0.5 mA
Patient leakage
current DC 0.01 mA 0.05 mA 0.01 mA 0.05 mA 0.01 mA 0.05 mA
AC 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
AC+DC 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
Patient leakage current 5 mA
Patient leakage current 5 mA 0.05 mA
Patient auxiliary
current DC 0.01 mA 0.05 mA 0.01 mA 0.05 mA 0.01 mA 0.05 mA
AC 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
Class equipment Type B applied part Type BF applied part Type CF applied part
Normal
condition Single fault
condition Normal
condition Single fault
condition Normal
condition Single fault
condition
Enclosure leakage current 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.1 mA 0.5 mA
Patient leakage
current DC 0.01 mA 0.05 mA 0.01 mA 0.05 mA 0.01 mA 0.05 mA
AC 0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
AC+DC
0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
Patient leakage current 5 mA
Patient leakage current 5 mA 0.05 mA
Patient auxiliary
current
DC
0.01 mA 0.05 mA 0.01 mA 0.05 mA 0.01 mA 0.05 mA
AC
0.1 mA 0.5 mA 0.1 mA 0.5 mA 0.01 mA 0.05 mA
Internally powered
equipment Type B applied part Type BF applied part Type CF applied part
Normal
condition Single fault
condition Normal
condition Single fault
condition Normal
condition Single fault
condition
Enclosure leakage current 0.1 mA 0.1 mA 0.1 mA
Patient leakage
current
DC
0.01 mA 0.01 mA 0.01 mA
AC 0.1 mA 0.1 mA 0.01 mA
AC+DC 0.1 mA 0.1 mA 0.01 mA
Patient leakage current 5 mA
Patient leakage current 5 mA 0.05 mA
Patient auxiliary
current DC 0.01 mA 0.01 mA 0.01 mA
AC 0.1 mA 0.1 mA 0.01 mA
・ Single fault condition (110% voltage applied) is performed with the optional
9196 APPLY UNIT etc.
・ After a system reset, because the default applied part type setting is type B,
the patient leakage current
measurement mode is inoperable. After
changing the applied part type setting, the following default settings are
effected:
Allowable values when the 9497 NETWORK B is installed