Hioki 3155-01, Instruction Manual

Page: 224 / 366

204
────────────────────────────────────────────────────
7.5 Low Resistance Measurement Mode (Universal)
────────────────────────────────────────────────────
7.5.4 Low Resistance Measurement Screen
２ ３ ４
５ ６
８
７
１０
１１
１２
１
９
Parameter Explanation
1
Maximum value The maximum measured value obtained in the current measuring mode
Changing the measuring mode will clear this value.
When measuring with 3157 measuring equipment settings, value
obtained as measured value is displayed.
2
Maximum value judgment Result of comparison of the maximum value with the allowable value
PASS
: Allowable value or lower
F A I L
: Higher than the allowable value
3 Current value Value obtained from the current measurement
When measuring with 3157 measuring equipment settings, measured
value of 3157 is displayed after data transfer is complete.
4 Current value judgment Result of comparison of the current value with the allowable value
PASS
: Allowable value or lower
F A I L
: Higher than the allowable value
5 Allowable value Current setting of the allowable value
6 Setting display for the
equipment to be measured
The following parameters are displayed:
Settings of the equipment to be measured
Model name
Number
With 3155 measuring equipment settings selected on low resistance measurement
screen, measurement starts immediately and displays current value.
When measuring with 3157 measuring equipment settings, measurement does not
start until pressing the key
.
* Screen: for ME equipment
(1) Setting condition display