Hioki 3155-01, Instruction Manual

Page: 143 / 366

123
────────────────────────────────────────────────────
6.2 Screens (for IEC/TR 60990)
────────────────────────────────────────────────────
(4) Beep sound set-up screen
Turn the beeper on or off.
Press either the key or key.
If the beep sound has been set to ON, it will be emitted under the
following conditions, and the beep sound setting for the allowable
value judgment become effective as well.
The beep sound is emitted when:
・
The power is turned on.
・ A key is pushed.
・
Making a measurement in the automatic measurement mode.
・ An input of 25 mA or more is detected in the leakage current
measurement mode.
The beep sound is emitted irrespective of the beep sound setting
when:
An error has occurred in the RS-232C system.
(5) Communications set-up screen
For details, refer to Section 8.5.1, "Communication Conditions
Setting."
(6) Printer set-up screen
For details, refer to Section 6.7.7, "Printer Set-up Screen."
(7) Time and date set-up screen
Make the time and date settings.
On the time and date set-up screen, press the keys as necessary.
Use the and keys found beneath the time and date to
set as desired.
The year may be set from 1997 to 2096.
Press the
key to finalize the settings.
(8) Self-testing screen
For details, refer to Section 6.7.9, "Self-test screen."
(9) Language set-up screen
For details, refer to Section 6.7.10, "Language Set-up screen."