Hioki 3155-01, Instruction Manual

Page: 66 / 366

46
────────────────────────────────────────────────────
5.3 Earth Leakage Current Measurement Mode (ME Equipment)
────────────────────────────────────────────────────
5.3.5 Earth Leakage Current Measurement Screen (ME
Equipment)
9
10
1
2
3
4
5 6
7
11
12
13
14
15
16
17
18
8
Parameter Explanation
1
Maximum value The maximum measured value obtained in the current measuring mode
Changing the measuring will clear this value.
(When this value is 1
μ A or lower, "UNDER 1 μ A" is displayed.)
2
Maximum value judgment Result of comparison of the maximum value with the allowable value
PASS
: Allowable value or lower,
F A I L
: Higher than the allowable value
3
Power source polarity for the
maximum value
Connection with the power source
Normal: , Reverse:
4
Condition of the equipment to
be measured for the
maximum value
Condition of the equipment to be measured
Normal condition:
Single fault condition (open power lead):
5
Current value Value obtained from the current measurement
(When this value is 1
μ A or lower, "UNDER 1 μ A" is displayed.)
6
Current value judgment Result of comparison of the current value with the allowable value
PASS
: Allowable value or lower,
F A I L
: Higher than the allowable value
7
Power source polarity for the
current value
Connection with the power source
Normal: , Reverse:
8
Condition of the equipment to
be measured for the current
value
Condition of the equipment to be measured
Normal condition:
Single fault condition (open power lead):
9
Allowable value Current setting of the allowable value in normal condition or single fault
condition
10
Setting display for the
equipment to be measured
The following parameters are displayed:
Settings of the equipment to be measured
Model name, Number, Current consumption monitor value, Line voltage
monitor value
Measurement of earth leakage current is made on the earth leakage current measurement
screen. The current measured value, maximum value, and setting condition are shown on the
earth leakage current measurement screen. Further, windows for changing the measurement
settings can be opened from this screen.
(1) Setting condition display