Hioki 3155-01, Instruction Manual

Page: 225 / 366

205
────────────────────────────────────────────────────
7.5 Low Resistance Measurement Mode (Universal)
────────────────────────────────────────────────────
Key Description of the function
7
(Clear the maximum
value)
Use as necessary to clear unnecessary data and start new measurements.
As long as this key is not pressed, the maximum value is not cleared even after
changing measurement settings in the same measuring mode.
The maximum value is cleared after changing the measuring mode.
When measuring with 3157 measuring equipment settings, measuring starts by
pressing the key and clears maximum value.
8 Opens the allowable value set-up window.
Range of the allowable value: 10 m
Ω to 500 Ω
When measuring with 3157 measuring equipment settings, allowable value is
determined by 3157 and allowable value set-up window cannot be selected.
When 3157 maximum test value is set under 0.010
Ω , 3155 allowable value
defaults to 0.010 Ω and judgment may differ between 3155 and 3157.
For details, refer to Section 7.6.2, "Allowable Value Setting."
9 Opens measurement window.
1. Choose or for measuring.
2. When measuring with 3157 measuring equipment settings, measurement
starts immediately.
When measuring with 3157 measuring equipment settings, measurement and
data transfer status are displayed.
: Measurement begins.
For details, refer to Section 7.6.7, "Low Resistance Measurement with 3157."
10
Opens the print-out window.
Prints out the maximum value displayed on the screen.
For details, refer to Section 7.6.5, "Printing out the Maximum Values."
11
Opens the save data window.
For details, refer to Section 7.6.6, "Saving the Maximum Values."
12
Exits the low resistance measurement, and returns to the initial screen.
NOTE
(2) Settings
・ When the maximum value and measured value overflow, "------" will be
displayed. Moreover, no judgment can be made in this case.
・ When measuring with 3157 measuring equipment settings, "------" will be
displayed until data transfer is complete normally. Moreover, no judgment
can be made in this case.