Hioki 3155-01, Instruction Manual

Page: 291 / 366

271
────────────────────────────────────────────────────
8.8.2 Commands
────────────────────────────────────────────────────
■
Reads out the saved data.
Syntax :MEMory:READ:MEASure?_< data>
data Numerical data in NR1 format and character data, <data unit number> and
<measuring mode> in order
<Data unit number> Numerical value from 1 to the number of models (total
number of data units)
<Measuring mode> EARTh/ENCLosure/RESistance/PATient1 (PAT1)/
PATient2 (PAT2)/PATient3 (PAT3)/PAUXiliary
(ME equipment)
EARTh Earth leakage current
ENCLosure Enclosure leakage current
RESistance Low resistance measurement
PATient1 Patient leakage current
PATient2 Patient leakage current
PATient3 Patient leakage current
PAUXiliary Patient auxiliary current
(Ordinary equipment)
EARTh Earth leakage current
ENCLosure Enclosure leakage current
RESistance Low resistance measurement
Function Returns the saved data of the specified measuring mode of the specified
data unit.
The data are orderd as follows, and the available data is read in a format
from
to (for enclosure leakage current, to , and for low resistance
measurement, to ). If there is no saved data, returns "0" only.
For earth leakage current, patient leakage current , patient leakage
current , patient leakage current and patient auxiliary current
< maximum value>, < judgment>, < power source polarity>, <
condition of the equipment to be measured>, < measurement network
filter> and < measurement current>
For enclosure leakage current
<
maximum value>, < judgment>, < power source polarity>, <
condition of the equipment to be measured>, < measurement network
filter>, < measurement current> and < contact condition>
For low resistance measurement
<
maximum value> and < judgment>
:MEMory:READ:MEASure?