Hioki 3155-01, Instruction Manual

Page: 305 / 366

285
────────────────────────────────────────────────────
────────────────────────────────────────────────────
Yes
Yes
The number of models (total
number of data units) is read
out.
":MEMory:NUMBer?"
Have the saved data
of all the data units
been read out?
":MEMory:READ:IDENtity?
<data unit number>"
":MEMory:READ:MEASure?
<data unit number>, <measuring mode>"
The number of
models (total number of
data units) = 0?
The model name and number
are read out.
Have the saved data
of all the measuring modes
been read out?
The saved data of the
measuring modes are read
out.
End
No
No
Yes
No
8.9 Reading in All the Saved Data
This section describes how to read in all the saved data.
1. ":MEMory:NUMBer?" is transmitted, and the number of models (total
number of data units) is read out.
2. ":MEMory:READ:IDENtity? <data unit number>" is transmitted, and the
model name and number of the specified data unit are read out.
(1) ":MEMory:READ:MEASure? <data unit number>, <measuring mode>" is
transmitted, and the saved data of the specified measuring mode of the
specified data unit is read out. If the data received is only "0", there is no
data saved for that mode.)
(2) (1) is repeated for the number of the specified measuring modes only.
3. If the number of models (total number of data units) is plural, (2) will be
repeated.