Hioki 3155-01, Instruction Manual

Page: 235 / 366

215
────────────────────────────────────────────────────
7.6 Condition Set-up Window Setting (Universal)
────────────────────────────────────────────────────
7.6.5 Printing out the Maximum Values (Universal)
NOTE
Example of a printout of
the maximum value in the
enclosure leakage current
The printer can be used to print out the maximum values and measurement
settings for each measuring mode. When printing out the maximum values,
the model name and number registered on the equipment set-up screen can be
changed.
Once registered, these items will be included with the maximum values for
each printout, unless changed. The registration of the model name and
number input on the printout window is common to the save data window as
well. When saving data, the model name and number are saved as well.
・ In cases where you wish to print out for the measurement settings (the
power source polarity, condition of the equipment to be measured, etc) for
each measuring mode individually, clear the maximum values each time,
and make the measurements before printing out.
・ For changing the model name and number, refer to Section 7.2.2,
"Equipment Set-up Screen."
Settings
(1) On the measuring mode screen, press the key.
(2) At the bottom of the screen, the printout window
will open.
Press the key to print out the maximum
values on the built-in printer.
Press the key to close the printout window
without printing out.
Press the key to feed paper to the printer.
During printing out, the key is displayed on
the screen. Press the key to stop printing out.
(3) Once the "Printout completed" message appears on
the screen, press the key to close the printout
window.
Press the key to feed paper to the printer. If
the key is pressed on the measuring mode
screen without first either saving or printing out the
current data, that data will be lost.
Example of a maximum value printout (universal)
The printer can be used to print out the registered
model name and number, as well as the maximum
value and measurement settings for each of the
measuring modes. The comment space is used for a
memo.