Hioki 3155-01, Instruction Manual

Page: 329 / 366

309
────────────────────────────────────────────────────
10.4 System Reset
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
10.4.2 Default Settings
System settings
Saved data None Printer contrast Normal
Beep sound ON Allowable value
judgment ON
Time and date Current (set at time
of shipping) Beep sound for
allowable value
judgment OFF
Communications
Transfer rate 9600 bps Stop bit 1 bit
Parity None Delimiter CR+LF
Data length 8 bits
Low resistance measurement
Allowable value 0.1 Ω
Settings for earth leakage current
Allowable value 3.5 mA Condition of the equipment
to be measured Normal condition
Measurement method Manual Measurement network filter ON1 (perception and
reaction)
Power source polarity Normal Measured current AC+DC
Settings for enclosure leakage current
Allowable value 3.5 mA Measurement network filter ON1 (perception and
reaction)
Measurement method Manual Measured current AC+DC
Power source polarity Normal Contact condition Between the enclosure
and the earth
Condition of the
equipment to be
measured Normal
condition
NOTE
Common settings
The 3155 is shipped without any measurement network installed in it, but the
default settings with a measurement network installed are as follows:
Grounding class of the equipment to be measured: Class
When the 9498 NETWORK C is installed
When the 9498 NETWORK C is installed, the allowable value of 0.25 mA is
set for other than class
equipment.