Hioki 3155-01, Instruction Manual

Page: 133 / 366

113
────────────────────────────────────────────────────
5.11 System Screen (ME Equipment)
────────────────────────────────────────────────────
5.11.8 Time and Date Set-up Screen
5.11.9 Self-test Screen
Make the time and date settings.
On the time and date set-up screen, press the keys as
necessary.
Use the and keys found beneath the time and
date to set as desired.
The year may be set from 1997 to 2096.
Press the key to finalize the settings.
The self-test function is used to check the operation of the
3155 unit.
The following keys are used to perform a variety of tests:
: Test the RAM.
: Test key operation.
: Test the LCD.
: Return to the system screen.
(1) RAM test
Press the key to test the RAM for proper operation.
・ If the RAM operates properly, the "RAM TEST OK!" message is displayed.
・ If the RAM does not operate properly, the "RAM TEST NG!" message is
displayed.
In this case, contact your dealer or HIOKI representative.
(2) KEY test
Press the key to test the touch panel for proper operation. Each of the
36 different keys are displayed in black on the screen. Press each one to
confirm its operation.
・ If all the keys are pressed, the screen returns to the self-test screen.
・ If any key fails to change to white, it is malfunctioning. Contact your dealer
or HIOKI representative.
(3) LCD test
Press the key to test the LCD for proper operation.
After pressing this key, half the screen is displayed as black and half as white,
after which one color changes to the other. If the entire screen is illuminated,
then it is operating properly. If there is any section of the screen that is not
illuminated, it could indicate an LCD malfunction. Contact your dealer or
HIOKI representative.