K.3
Basic Extended Isolated amplifier card
K.3.1
GN813 Basic XT ISO 1 MS/s input card
l
8 analog channels
l
Unbalanced differential inputs
l
±
2 V to
±
100 V input range
l
250 V DC channel to channel isolation
l
User selectable digital Bessel and FIR filters
l
1 MS/s sample rate
l
16 bit resolution
l
512 MB memory
l
Single isolated BNC for each channel
The GEN DAQ Basic XT ISO 1 MS/s input card is a general
purpose signal conditioner for use with voltage inputs, externally
conditioned signals or isolated probes and current clamps.
The basic signal conditioner provides eight channels of isolated
single
-
ended voltage inputs from
±
2 V to
±
100 V Full Scale with
full offset and auto
-
zero capability. Every channel is equipped with
an independent full range input amplifier, a seven
-
pole Bessel and
Butterworth anti
-
alias filter, a 16 bit Analog
-
to
-
Digital converter
operating at 1 MS/s and several selections of digital filtering.
The on
-
board transient memory size is 256 Mega
-
Samples (512
Mega
-
Bytes). The memory is shared by enabled channels.
Each channel also features two set
-
points for trigger or alarm
purposes. Extensive acquisition and trigger modes allow for many
different ways to capture valuable data, even at the highest sample rates. All
channels are synchronously sampled at full speed without multiplexing and
almost immeasurable crosstalk. The model uses standard isolated BNC
connectors, whose shells are connected to isolated ground. The inputs have
an impedance of 1 MΩ and are compatible with isolated probes and current
clamps.
For more information on the GN813 Basic XT ISO 1 MS/s input card, please
refer to "B2635-4.1 en (GEN series GN813)" on page 1067.
1
2
3
4
5
6
7
8
1 MW 250Vpk
!
1
2
3
!
4
5
6
7
8
GEN3i
990
I3763-3.1 en HBM: public
