E.3.2
ELO touch screen
Note
Be as accurate as possible when tapping with your finger. Any deviation from
the indicated point will result in misaligned touch screen operation.
The calibration process can be redone to make adjustments for personal usage.
Three (3) points need to be tapped on the screen. The tap positions are
indicated on the screen with a circle that has a blue crosshair.
After starting the calibration process, follow the instructions listed on the screen.
Press the Esc key to cancel the calibration process at any time. No changes
are made when this process is canceled.
1
The first crosshair appears in the upper left
-
hand corner of the screen.
A Crosshair
First crosshair for calibration.
B Description
Move your finger to the center of the target, then lift your
finger.
To skip calibrating for this monitor, press Esc.
GEN3i
I3763-3.1 en HBM: public
849
