The built
-
in laser complies with laser product standards set by government
agencies for Class 1 laser products:
l
In the USA, the Master/Slave card is certified as a Class 1 laser product
conforming to the requirements contained in the Department of Health and
Human Services (DHHS) regulation CDRH 21 CFR,
Chapter I Subchapter J Part 1040.10.
l
Outside the USA, the Master/Slave card is certified as a Class 1 laser
product conforming to the requirements contained in IEC/
EN 60825
-
1:1994+A1+A2 and IEC/EN 60825
-
2.
Installing the Master/Slave card
To install the Master/Slave card proceed as follows:
1
Power off the GEN series and remove the power input cable.
2
Ensure that the ejector levers are in the outermost position, tilting away
from the card.
GEN3i
1008
I3763-3.1 en HBM: public