In the
Setup of Display
dialog, select the
Annotation & Grid
tab.
For external time base recordings, select the X
-
Annotation scaling to
Position
. In this mode, there are three ways to show the X
-
axis.
Figure H.5:
Display Setup dialog
-
Annotation & Grid
A
X
-
Annotation/Position check box
B
Linear
C
Rotational, 360 degrees per cycle
D
Rotational, 720 degrees per cycle
A
Linear
The X position is expressed in units as selected in the Mainframe –
“Memory & Time base” settings dialog.
E.g. 1000 degrees will be shown as 1000 degrees on the X
-
axis.
B
Rotational, 360 degrees per cycle
The X position is expressed by 360 degrees cycles and the number of
remaining degrees.
E.g. 1200 degrees will be shown as 3:120, which means 3 cycles and 120
degrees.
GEN3i
934
I3763-3.1 en HBM: public