Figure 11.19 shows the two interfaces of this option without installed SFP+
option, for further details on the SFP+ options please see the next section.
Once the SFP+ option is installed in the 10 Gbit Ethernet interface, an LC optical
cable can be connected.
10 Gbit Ethernet Option accessories
The 10 Gbit Ethernet card supports two (10 Gbit) SFP+ modules which are
separately available, see options in the specifications sheet of this section for
ordering.
The two types of 10 Gbit SFP+ module that are used with this Ethernet card
are:
l
10 Gbit (850 nm)
-
Multi Mode
l
10 Gbit (1310 nm)
-
Single Mode
Note
SFP modules rated at 1 Gbit and are not suitable for this card. Please select
the SFP+ modules which are rated at 10 Gbit.
A
B
Figure 11.20:
SFP Optical Network devices
A
SFP shown with dust
-
cap and removal bar
B
SFP label
-
850 or 1310 nm
Note
1310 nm Single Mode (SM) and 850 nm Multi Mode (MM) optical fiber
transceivers use specific cables and connectors therefore please check the
correct mode/specification of fiber optic cable is used.
GEN3i
192
I3763-3.1 en HBM: public
