8.3
Wireless network
Your GEN3i includes an internal wireless network adapter. With this Wi
-
Fi
network adapter, you have the freedom to connect to your local Wi
-
Fi network.
HINT/TIP
In some areas or application uses, the presence of a wireless network option
in the instrument is not allowed. Disabling the wireless network within
Windows
®
is not a satisfactory solution. Therefore, HBM supports removing or
electronically disabling the wireless network. This disables the use of wireless
network permanently.
To remove or electronically disable the Wi
-
Fi, contact HBM before ordering and
contact HBM service after delivery.
The adapter features full compliance with the IEEE 802.11 b/g/n wireless
standard, offering the best compatibility and future
-
proof reliability. With data
rates up to 300 Mbit/s, the adapter supports a comfortable wireless bandwidth.
Below is a quick start procedure to connect GEN3i to your local network and a
quick start procedure to disconnect GEN3i from a network.
For wireless details on network operation, please refer to the Windows Help
system. If you are uncomfortable or not yet familiar with these procedures,
please contact your IT department or a network knowledgeable person to assist
you.
IMPORTANT
Please note that there are differences of the wireless network connection
between Windows
®
7 and Windows
®
10. For information of installation
with Windows
®
10, please refer to chapter "Windows 10: To connect
GEN3i to the local wireless network:" on page 125.
GEN3i
122
I3763-3.1 en HBM: public
