HBM GEN3i, User Manual

Page: 296 / 1160

12.10.3 Connector pinning GN6470 and GN4070
The GN6470 binary marker cards come with four 26 pin connectors. The
GN4070 replaces the top two connectors with eight optical receivers and one
optical transmitter. The following diagram and table provide the pinning
information of each 26 pin connector.
9
1
26
19
18
10
Figure 12.67: Binary marker card connector pinning
Table 12.7: Event bit (marker) connector pinning
PIN #
EV1
-
16 EV17
-
32 EV33
-
48 EV49
-
64
1 Event Bit 16 Event Bit 32 Event Bit 48 Event Bit 64
2 Event Bit 15 Event Bit 31 Event Bit 47 Event Bit 63 *
3 Event Bit 14 Event Bit 30 Event Bit 46 Event Bit 62 *
4 Event Bit 13 Event Bit 29 Event Bit 45 Event Bit 61 *
5 Event Bit 12 Event Bit 28 Event Bit 44 Event Bit 60
6 Event Bit 11 Event Bit 27 Event Bit 43 Event Bit 59 *
7 Event Bit 10 Event Bit 26 Event Bit 42 Event Bit 58 *
8 Event Bit 9 Event Bit 25 Event Bit 41 Event Bit 57 *
9 Event Bit 8 Event Bit 24 Event Bit 40 Event Bit 56
10 Event Bit 7 Event Bit 23 Event Bit 39 Event Bit 55 *
11 Event Bit 6 Event Bit 22 Event Bit 38 Event Bit 54 *
12 Event Bit 5 Event Bit 21 Event Bit 37 Event Bit 53 *
13 Event Bit 4 Event Bit 20 Event Bit 36 Event Bit 52
14 Event Bit 3 Event Bit 19 Event Bit 35 Event Bit 51
15 Event Bit 2 Event Bit 18 Event Bit 34 Event Bit 50
16 Event Bit 1 Event Bit 17 Event Bit 33 Event Bit 49
17 Ground Ground Ground Ground
18 Ground Ground Ground Ground
19 Ground Ground Ground Ground
20 Ground Ground Ground Ground
GEN3i
296 I3763-3.1 en HBM: public