G.3.4
GEN3i/GEN7i with standard network switch and four or more of
QuantumX "B" version modules
Figure G.11:
GEN3i with multiple QuantumX "B" version modules
Note
Setup only shows GEN3i. GEN3i can be replaced by GEN7i.
Note
* Multiple QuantumX modules requires more than one power supply; see
QuantumX documentation.
Note
** All modules must be “B“ versions; one module must set to “clock master“ and
connected to the GEN3i PTP Ethernet.
HINT/TIP
This setup uses two network ports on the GEN3i PC section.
Use fixed IP address setup with different base IP address and non overlapping
net masks for each of the GEN3i network ports to make sure the setup always
works.
GEN3i
916
I3763-3.1 en HBM: public
