E.2.3
Image restore phase 1
-
Installing devices
The installation first initializes the system and scans for devices.
Figure E.9:
Image restore phase 1 progress
After the devices have been installed, the system reboots. The boot menu
appears (see Figure E.9) for 30 seconds before it continues. No selection is
required; simply wait.
Note
Windows
®
10: System doesn't reboot but continues with “Image restore phase
2
-
Measuring video performance” (see chapter below).
E.2.4
Image restore phase 2
-
Measuring video performance
The system is prepared for first use and the video performance is tested.
Note
Windows
®
10: Phase 2 is now getting ready. The system has installed the
devices and is installing software components. After installing the components,
the system reboots.
Figure E.10:
Image restore phase 2 progress
After checking the video performance, the system reboots. The boot menu (see
Figure E.10) appears for 30 seconds again. No selection is required; simply
wait.
GEN3i
818
I3763-3.1 en HBM: public
