Temp Data Logger User Manual
-TempU06 Series
Model:
TempU06
TempU06 L60
TempU06 L100
TempU06 L200
*
External Temperature Probe
Back Splint
1--
�
_-
_
.!:
_
=
_
,;!
_
=
�
:::::j
1
-
u
s
B
Interface
�---++-+--StartNiew/Mark
,,
"
Button
*
Please note the Model TempU06 is with built-in temperature
sensor, it do not have external temperature probe
LCD Display Instruction
12
1
✓Ok
8
Bluetooth*
XAlarm
2
►Start recording
9
Flight mode
■
Stop recording
3&14
Alarm zones
10 Bluetooth communicating
j,H1 ,H2(High) l,L1 ,L2(Low)
4 Delay recording
11 Unit
5 Password (AccessKey) protected
12 Reading
6
Stop button disabled
13 Data cover
7
Remaining battery level
15 Statistics
*
Please note the Model TempU06 do not have bluetooth
function
Product Introduction
The TempU06 series are mainly used to monitor and record
temperature data of vaccines, pharmaceuticals.foods, and
other products during storage and transportation. The
Bluetooth connectivity of the TempU06 series and Temp
Logger App brings customers the advantages of tracking data
for data viewing. And you can enable quick connection with
PC to get data by Temperature Management Software.no
cable or reader required for downloading data.
Feature
► Bluetooth and USB connection. Dual interface ensures
convenience and stability*
► Large LCD screen with powerful indicators
► External temperature probe for low temperature
condition.up to -200
°
(*
► Flight mode for air transportation*
► FDA 21 CFR Part 11, CE, EN12830, RoHS, NIST
traceable calibration
► No need any software to get the PDF and CSV file
*
Please note the Model TempU06 do not have bluetooth function or flight mode
*
For the temperature range, please refer to the datasheet
LCD Screens
Home Screens
<D Initialization
1 • :eii ·I
® Log interface
@Max Temp interface
Error Screens
X ... •
E□□ I
@Above upper & lower limit
I
1-6
·1
© Mark interface
@Min Temp interface
X ...
{"'
E□□2
If there E001 or E002 on the screen, please check
CD If the sensor is not connected or broken
® If over the temperature detect range
Download Report Screen
I
L�
·1
Connecting to USB
Connect data logger to USB port.it
will automatically generate reports.
How to use
a.Start recording
Press and hold the left button for
more than 3s until the led light
turns green.and the"
►
"or "WAIT'
�
,
displays on the screen, which
'
indicates the logger is started.
(For the model with external temperature probe, please make
sure the sensor is completely inserted into the device.)
b.Mark
c.Stop recording
d.Turn on/off Bluetooth
When the device is recording,
press and hold the left button for
more than 3s,and the screen will
switch to the "MARK" interface.The
number of "MARK" will increase by
one.indicating data was marked
successfully.
Press and hold the right button for
more than 3s until the led light turns
red.and the "■" displays on the
screen,indicating stop recording
successfully.
Press and hold the two buttons for
more than 3s at the same time.until
the red light flashes quickly, and the
" * " displays on the screen or
disappears.indicating the bluetooth
was turn on or off.
(when the device in flight mode, press and hold the two
buttons for more than 3s will quit the flight mode)
e. Get report
After recording.there are two ways
to get report:connect the device
with USB port of PC or using Temp
Logger App on smart phone,it will
automatically generate PDF and
CSV report.
