This setting enables both Start and Stop control at the same time.
The external Start/Stop inputs are edge
-
sensitive. As the Start/Stop signals are
shared event input bits, the active edge is selected by means of the invert
setting of Event channels 15 and 16 of the corresponding card (see
Figure H.14). These settings are located under
Input/Marker (event)
in the
settings spreadsheet.
Figure H.14:
Event channels
Marker Channel 16 controls the active edge of the Start input, while Marker
Channel 15 controls the active edge of the Stop input. Set Invert to
off
for a
rising edge. Set it to
on
for a falling edge.
GEN3i
942
I3763-3.1 en HBM: public
