Note
The calibration assumes that the factory calibrated touch screen is correct for
the touch screen to operate properly. If the tap test continues to fail, contact
HBM service to redo the factory calibration using the Wacom utility.
5
After the calibration, a small verification of the new calibration data is
shown to check whether the new verification data is meaningful and to
make sure that the data will not cause problems using device:
Figure E.34:
Touch screen calibration verification (step 5)
Five (5) rectangles appear on the screen. Tap each rectangle individually.
If tapped accurately, the rectangle turns green.
GEN3i
I3763-3.1 en HBM: public
845
