Hakko Electronics Monitouch V Series, Reference Manual, Page: 619 / 746

Chapter 25 Memory Card Mode
25-10
Memory Card Mode Setting Procedure
* Before using memory card mode, it is necessary to initialize the SRAM or CF card that
is used as storage media. Use the [Function: Card Format] switch when initializing the
SRAM or CR card. If any setting for memory card mode has been changed, it is
necessary to initialize the SRAM or CF card again. Note that data in the SRAM or CF
card will be cleared when it is initialized.
In addition to the above, initialization or formatting may be required depending
on the storage media.
•
To save data in the built-in SRAM or SRAM cassette:
Select [System Setting]
→
[SRAM/Clock Setting].
→
[ Memory Card Emulation Area]: Check the box.
→
[Number of Words]: Set the required capacity.
•
To save data in the CREC (SRAM memory card):
Select [System Setting]
→
[Modular Jack].
→
[Modular Jack 1] or [Modular Jack 2]: [Memory Card]
•
To save data in a CF card:
No special setting is required.
System Setting Memory Card Setting
•
No. 0 (to 15)
Type Data File
I/F Memory
Screen Edit [Memory Card Mode] icon
•
Memory card mode tool bar
Page 25-18
Page 25-19
Page 25-20
(*)
Page 25-19
page 25-20
Page 25-19
Page 25-16