Hakko Electronics Monitouch V Series, Reference Manual

Page: 469 / 746

Chapter 17 Animation (V7 Only)
17-14
[Specify the Coordinates by Mouse]
[ New] is checked:
Click this button, the mouse cursor as shown below is displayed.
When you select [None] for [Movement Pattern], click the desired points on
the screen as if you are drawing straight lines. The coordinates are defined
in order. Double-click to determine the points, the former dialog is displayed.
[Point Count] is automatically set according to the number of times you
clicked.
When you select [Circle] for [Movement Pattern], the drawing method varies
depending on if you check [
Make it Circle] or not.
•
[ Make it Circle] is checked:
•
[ Make it Circle] is unchecked:
The path is drawn with an arc.
By right-clicking, the former [Animation] dialog is displayed.
Start point
Click
2 4
3
End point
Click
Click
Click
Double-click
Mouse specifying is automatically finished when you reach the 32nd point.
: Start point : End point
: Start point
: End point
Clockwise
Counterclockwise