Hakko Electronics Monitouch V Series, Reference Manual

Page: 263 / 746

Chapter 8 Graph Display
8-28
[Trends] (3 to 800)
Specify the desired maximum number of plot points.
[Display in Area]
Set the inside colors of the trend graph. Select [Foreground], [Background],
and [Tile]. The [Background] option becomes active when any tile pattern
other than pattern 0 (extreme left) is chosen for [Tile].
[Setting All]
Use the [Setting All] function to set the same data for [Data Length], [Graph
Max. Value], and [Graph Min. Value] of trend line Nos. 0 to 15.
1. Click tabs of [0] to [15], and check the [ Trend Display] option.
2. Open the [Setting 1] tab window. Click the [Setting] button next to
[Setting All]. The [Setting All] dialog is displayed.
3. Set the following items.
[Data Length]
Set the data length to be used for trend graph display.
[1-Word]: word
[2-Word]: double-word
[Graph Max. Value] [Graph Min. Value]
Specify the maximum and minimum values for data calculation.
4. Click [OK].
The specified [Data Length], [Graph Max. Value], and [Graph Min. Value]
are used for the selected trend line Nos. 0 to 15 where [
Trend Display]
is checked.
[Process Cycle]
Select the desired process cycle. ( Refer to “Appendix 2 Process
Cycle.”)
The [Setting All] function is used for trend lines for which [Trend Display] is
checked in their respective tab window Nos. 0 to 15.