![background image](http://html1.mh-extra.com/html/hakko-electronics/monitouch-v-series/monitouch-v-series_reference-manual_3315280045.webp)
Chapter 1 System Setting
1-8
•
Bit 11 (backlight)
When [Auto 1] or [Auto 2] is selected in the [Backlight] tab window of the
[Unit Setting] dialog from the [System Setting] menu, this bit takes effect.
When this bit shows “1” (ON level), the backlight is always turned on. When
this bit shows “0” (OFF level), the backlight is turned off if all the
requirements for [Auto 1] or [Auto 2] are satisfied. For more information,
refer to page 1-16.
•
Bit 12 (analog RGB output)
For more information, refer to the EU-01 Instruction Manual separately
provided.
•
Bit 13 (screen internal switching)
This bit controls screen switching by internal switches.
[0]: Screen switching by internal switches is allowed.
[1]: Screen switching by internal switches is prohibited.
* An “internal switch” means a switch you can create for internal processing
within the MONITOUCH by selecting [Screen] or [Return] for [Function] of
the switch.
•
Bit 14 (screen forced switching)
This bit is used when the screen number is specified from the PLC. Use this
bit when the same screen number that was previously used should be
specified.
If the screen display was once switched by an internal switch, generally it
cannot be returned to the former screen that was specified by an external
command, because the external screen command number remains the
same as before in [Read Area] “n + 2” (explained later). In such a case, it is
possible to forcibly switch the screen to the screen number contained in
[Read Area] “n + 2” at the leading edge [0
→
1] of bit 14.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
RUN
STOP
D001
D002
D000
5
Screen No. 5
No. 2
Screen No. 2
No. 2
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0
5
D000
D001
D002
Screen No. 5
No. 2
Screen forced switching (bit 14)
Read area “n + 2”
= external screen command
Data in the read area “n + 2” remains “5”
even if the actual screen has been switched
by an internal command.
To show screen No. 5 again using an external
screen command, set [0
→
1] to bit 14 of read
area “n + 1.”
Summary of Contents for Monitouch V Series
